Dettagliatissimo kit del fanoso Pegasus della classe Swan.
Il kit riproduce il Pegasus completamente decorato, come disegnato da Williams e costruito nei cantieri Sheerness.
Commissionato come scorta ai convogli, il Pegasus fu affondato a Newfoundland il 31 Ottobre 1777,
Gli sloop della classe Swan avevano a bordo 125 uomini di equipaggio ed erano armati inizialmente con 14 cannoni (più avanti diventati 16) and 16 colubrine
I piani originali esistono tuttora ed è da essi che il modello è stato progettato.


Il contenuto del kit:
Tutte le parti dello scafo e i dettagli dei ponti sono stati tagliati al laser in differenti materiali.
Rivestimento con doppio fasciame con tiglio e noce.
Fotoincisioni in ottone molto dettagliate che includono finestrine, landre, marciapiedi e molti dettagli degli alberi e dei pennoni, dettagli dei portelli dei cannoni, cerniere e moltissimi altri dettagli per riprodurre un modello fantastico e del più alto livello.
Inoltre una quantità di piastrine in rame serviranno per rivestire l'opera viva ottenendo un risultato formidabile.

I piani di costruzione sono stampati in grandi tavole con tutti i dettagli per la realizzazione delle manovre.
Con i piani sono incluse anche dettagliate istruzioni.

 

Scala 1:64 - Lunghezza cm.80

---

 

HMS PEGASUS - 1776

Sixth Rate Swan Class Ship Rigged Sloop

H.M.S. Pegasus was the sixth vessel built of the Swan Class of ship rigged sloop, of which twenty five of the class were built from 1766 to 1780.
Pegasus, as with the entire Swan class was designed by Williams and her construction was ordered by the Admiralty on 1st August 1775 to be built at Sheerness Dockyard. The keel was laid in May 1775 and launched on 27th December 1776.

The Swan class of 6th Rate sloops were unusually attractive for the class of vessel, with not only very sleek hull lines but also the unusual amount of decoration for the size of vessel. They were built just before the Admiralty issued orders that all vessels (especially lesser rates) were to have the minimal amount of decoration and carvings to save any unnecessary costs, due to the ever continuing war with France and other nations.

There is little remaining about H.M.S. Pegasus’ operational career, but from what little evidence there is, Pegasus was commissioned mainly for convoy escort duty and dispatch duty.  Pegasus had a very short operation career, foundering off Newfoundland on 31st October 1777, her sister, H.M.S. Fly also foundered off Newfoundland some years later in 1802.
The Swan Class measured 97’ 7” on the gun deck and displaced 300 tons. They carried 125 officers and men and initially carried 14 guns (later 16) and 16 swivel guns.
The original plans of the Pegasus still exist, and it is with these plans the kit is based upon.

The kit includes the following;
Laser cut wooden parts throughout. Many photo etched brass detail sheets that include window frames, deadeye strop/chainplate fittings, footrope stirrups and other fine mast and yard detail, gunport scuttles, hinges – the list is endless.
Full size plans, which include very easy to follow rigging detail.
The copper plates for below the waterline are of a completely new design. They are so accurate that there is a left and right side to the plates, and there are no unseemly over protruding nail heads, everything is scaled at 1:64th.
Accompanying the plans is a fully illustrated building manual, taking you through every stage of the critical hull construction. There is also a full English instruction booklet, describing every detail of each stage of the main construction, along with histories.

 

Scale 1:64th - Total Length cm.80

---

 

art. 1300/05
Scatola di Montaggio - Assembly Kit - Boîte de Construction

 
art. 1100/05
Piani di costruzione - Construction Plans - Plans de Montage

 

OTHER VICTORY MODELS:	LADY NELSON	FLY